Saturday, July 18, 2020

Peg Loom Weaving

During quarantine, BluPrint (the old Craftsy) made freely available most of their video lessons. After looking at lesson options, I watched Startup Library: Rigid Heddle Weaving classes with Deborah Jarchow. I was fascinated! Then I watched Rigid Heddle Weaving lessons by Angela Tong. By then I knew I wanted a rigid heddle loom. 

If you're not familiar with rigid heddle loom weaving, this is what a $189 loom looks like. This is an Ashford 16"-wide, Samplet, a starter tabletop loom. The wider/larger the loom, the higher the cost. 

I'd need to invest in yarn too. After admitting to myself I didn't need to start stashing yarn to make scarves that I wouldn't wear here in Florida, I let the idea go.

Until I saw a twining loom that's designed for rag weaving. For $149 (stand shown not included) a Libbylula.com loom will make a rug that's as large as 24" X 41. What a great way to use fabric strips!

This time I thought, "That's pretty expensive for a couple of rag rugs."

After I mentioned my weaving interest to quilters on a Big Cypress Zoom call, Selina contacted me to offer me use of her peg loom. I had to look it up to see what a peg loom is, and how it works.

When I realized this peg loom might be a good option for what I had in mind, I borrowed it. Thank you, Selina! Happily, she lives not far from me. 

This peg loom can be used to weave a variety of widths, up to 24" - just use only the pegs you want for the width you want. I knew I wanted to weave a rug, so I used all 24 pegs. 

How to Peg Loom Weave
Each of the 24 pegs has a small hole drilled in the bottom. The warp thread - the "foundation thread" upon which the weaving is done - is fed through the hole and the peg is returned to the base (thread toward the bottom). Selina sent along a package of Gum brand floss threaders that work perfectly to pull the thread through the hole.

I used Sugar and Cream yarn (the yarn I use to knit dishcloths) to thread all 24 pins. To calculate how long each warp thread should be, double the length of your project and add 20 percent. Because I intended to make a rug that measures 24" (peg width) by 36", each strand is 90" with half the length on each side of the peg hole.

For the weft - the strands woven onto the pegs - I used 3/4"-wide selvages. For several years, I've been removing UNprinted selvages from my fabric yardage. Well, I remove both the printed and unprinted selvages, but the printed ones go in a plastic bag, and the unprinted ones are tossed in a bin. 

I prefer to join selvage strips, end-to-end, using a very short sewing machine stitch length, but I also tried the cut-a-slit method. 

Cut slits into both ends of a strip. Slide one into the other and make a loop. This joining works fine on a rag rug, but I still prefer the neatness of a machine-sewn overlap of two strips.

To weave, wind the continuous strip back and forth through the pegs, alternating direction at the end of a row. 

When the pegs are full, simply lift a peg and slide the weft (woven part) onto the warp, then put the peg back into the hole, ready for the next stack of weaving. 

Manually slide the woven part onto the warp. 

Here's my set-up. You can see how handy it is to pick a selvage from the canvas bin, machine piece it to the weft, and keep weaving. 



There's no rhyme or reason to how the colors are arranged. Though I will say that in general, selvages have a lot of white in them. I'm glad I have some solid selvages to add pops of color. 

When I saw how close I was to emptying the canvas bin, I decided to "just keep going." I'm glad I did! 

I used every single selvage in my bin. It's completely empty! Whoo-hoo!

To finish the weaving, cut the warp threads at the pegs. Pair warp threads and knot with a half-hitch, knotting across the width, then flipping the rug over to make a second row of knot the other direction. With a large crochet hook, draw pairs of tails along the warp, through the weave. 
 
Finished Peg Loom Woven Rug

The rug finished at 24" X 37. I am ridiculously happy with how it turned out!

All the color! A selvage pillow, my favorite scrap-decoupaged desk, and my new selvage rug.

This is where the rug will rest, alongside the bed where I can step onto it every night and day. 

Linda

34 comments:

  1. Oh, that is fun, Linda! I'm so glad you gave a clear explanation for how it's done. It's especially nice because the loom is so simple and does not require the space of the others you referenced. Did you get the notice that BluPrint will be returning under new ownership? Also, the event I was scheduled to attend at TV will be held in 2021- so pushed off by a year. I had already cancelled our VRBO for this fall.

    ReplyDelete
  2. This is awesome and now I want to make one too!!!

    ReplyDelete
  3. Love it! Goes nicely with your cushion and desk too but by the bed will be nice to step on. I've never seen that method of weaving before but the results are wonderful. Perfect for those plain salvage edges. It seems like a simple set-up with minimal involved. My MIL had a loom and made rag rugs but her set-up was a large loom that took up a lot of space. She weaved other things for awhile too before finally selling it.

    ReplyDelete
  4. That looks like such fun, not to mention being a perfect way to use up all those selvedges. It's different than any other loom I'm familiar with, as it appears that the warp threads are not under tension but merely hang ov the back of the table? Your rug turned out beautiful with the mix of lights and brights. Perfect for your setting!

    ReplyDelete
  5. Well I don't totally get how it works but I'm thrilled you enjoyed it and I adore your finished rug! wow! (And I loved hearing your conversations with yourself, haha. Very fun.)

    ReplyDelete
  6. How fun! You made it look pretty easy. Love all the color you got from your selvedges.

    ReplyDelete
    Replies
    1. Hi Debbie! Thanks so much for your comment! I tried to explain it well enough that people would see that it's an easy loom to use. I love that color too! But wouldn't it be fun to make a rug (or something) in a planned way? Sorry I can't reply to you directly; your Google profile is set to "no-reply commenter." If you'd like me to give you directions as to how to change that, please let me know.

      Delete
  7. Simply beautiful! Thanks for the instructions - it’s such a good way to use up some of the scraps that I’ve got hanging around. Like Debbie, it wasn’t immediately apparent how it worked, so I re-read the part about lifting the pegs and sliding the fabric down the yarn. Finally, the light bulb went off in my head! May have to make a small investment in a peg loom!

    ReplyDelete
    Replies
    1. Hey there, CC! I can't reply to you because your Google profile is set to "no-reply commenter," but thanks for your compliments! I hope you see this reply to you. Yes, this is definitely a great way to use scraps, and I'm tempted to dig into my stash to make another rug with a planned color arrangement. Glad you worked out what I meant in the explanation (sorry I wasn't completely clear). I think a peg loom like this is about $35, or maybe you know someone who could make one for you. If I knew someone who was handy, I'd have them built me a twining loom!

      Delete
  8. Very interesting. Enjoy your new rug! My friend's DH built her a twining loom a few weeks ago. Apparently, it's a very zen activity. She finished her first rug this week, using every last inch of a king sized duvet and many yards of old stash fabric!!

    ReplyDelete
  9. Well that was fast. You were just researching things and bam there is your cute cheerful rug!! Great work.

    ReplyDelete
  10. I really like your rug! What a great use of your scraps. One of my favorite things to do, use up the leftovers!

    ReplyDelete
    Replies
    1. Hi Therese! Thank you! I agree that this rug is a great way to use up the littlest bits. Now I'm thinking I'm ready to dig into stash to start cutting up strips for another rug. (Sorry I can't reply to you directly, but your Google profile is set to "no-reply commenter." Please send me a message, with your email address, so I can help you change your profile setting... if you wish!)

      Delete
  11. How cool! And, with little investment you've got a neat rug! So, the fabric slides easily off the pegs? So clever!

    ReplyDelete
  12. I enjoy reading your blog and am always interested in what you are working on, but this post blew me away. I love your rug, it reminds me of one my grandmother had in front of her kitchen sink. After reading it, I went on an online hunt for looms. I may have to talk my husband into making one for me.

    ReplyDelete
  13. Ha! My neighbor weaves and we both have an overload of materials for our crafts. Therefore we jokingly agree that she won't take up quilting and I won't take up weaving, though when you're a "fiber person" it's always a temptation to add another craft! I enjoyed seeing your project.

    ReplyDelete
  14. It’s always fun to learn how to do something new and creatively fun! I almost want to try it!

    ReplyDelete
  15. Hi Linda, Thank you so much for sharing. I weave on a smaller peg loom, but have just begun to use fabric. So, I really appreciate the tips about how to join the fabric. I haven't sewn in years, but I'm thinking a small machine would be very helpful.
    The rug is lovely. Especially the bright colors. Mary

    ReplyDelete
  16. Hi Linda, Thank you so much for sharing. I weave on a smaller peg loom, but have just begun to use fabric. So, I really appreciate the tips about how to join the fabric. I haven't sewn in years, but I'm thinking a small machine would be very helpful.
    The rug is lovely. Especially the bright colors. Mary

    ReplyDelete
    Replies
    1. Hello Mary! Thanks for your compliments, and I'm glad you found this information helpful! I would reply to you via email, but you have set your Google profile to "no-reply commenter." But I hope you decide to invest in a sewing machine. I'm sure you could find a used one that's not very expensive. Or I would suggest you look at a Janome Derby. It's a five pound sewing machine meant for kids' but I use mine often. First, I love the colors it comes in (mine is aqua), and second, it's so very portable. Just know that it doesn't have a light. Still, at about $50-$60, it's a good buy. Hope you have fun with your peg loom weaving! Thanks for commenting.

      Delete
  17. I have plastic peg looms which dont have a hole to run the warp thread. Any suggestions on how to do this? The pegs are removeable.

    ReplyDelete
    Replies
    1. Hello Unknown. Because you didn't provide your email address, I'm unable to respond to you personally. So, I hope you see this. I haven't heard of plastic pegs, nor plastic pegs with no holes. I can't imagine what this would be used for! No, I have no suggestions on how to weave with them because warp and weft are both needed for weaving. Can a hole be drilled into each one? Or perhaps there's a piece of plastic there that has already been perforated and only needs to be removed. If you can't add holes, I'd say what you have is worthless. Please let me know what you end up doing.

      Delete
    2. Sounds like a knitting loom, rather than a peg loom. Both are great fun and easy to use.

      Delete
  18. Hey there! Awesome information! I just got a peg loom and made my first rug. Now I'm wondering... What would happen if I used a lighter weight scrap/yarn than wide fabric strips? Have you ever tried this and what happened?

    ReplyDelete
    Replies
    1. Hello Julia! Please let me know if you read this reply to your comment. Your Google profile is set to “no-reply commenter,” so I have no means of answering you except here. In any case, I am unable to answer your question because I have used a peg loom to only weave fabric or selvedges. I have never woven yarn because I don’t stash yarn. I’m sorry I’m unable to help you with information about it.

      Delete
    2. I am just happening on this post almost a year later but bulky yarn works great. I am currently working on a rather large peg loom rug using 85% wool/15% mohair slightly felted singles yarn (like maybe a 6 weight for knitting purposes) and it is so soft but also feels sturdy. You will need a lot, though. I have used something like 2 pounds of yarn (8 skeins) so far and I am only a couple of feet in (going 3 feet wide). Thinking this will be a good way to use some of the really bulky yarn I've made on my spinning wheel that isn't good for much else.

      Delete
    3. Again… (Sigh) you’re a commenter to whom I am unable to reply because either your Google profile is set to private, or you’re commenting using a Yahoo account. In any case, I appreciate hearing from you about peg loom weaving. Sounds like bulky yarn is well-suited for it. Thus far, I’ve woven only with fabric selvedges, or strips of fabric. But should I ever have an occasion to pick up bulky yarn, I’ll do so. Thank you for the suggestion! (Gosh, I hope you revisit this post, to see my reply and thanks back to you.)

      Delete
  19. How do I buy a peg loom as in pictures?
    Phyllis MacNichol-Collins

    ReplyDelete
  20. Hi Phyllis! I wish I could reply to you directly, but I don't have your email address. In any case, I don't have an answer for you about where to buy a peg loom. This one was purchased from a quilt show vendor many years ago. However, I Googled "buy a peg loom" and several shops came up - The Woolery, Etsy, and Michaels, among others. I hope you can find one. Or maybe even MAKE one!

    ReplyDelete
  21. I have a peg loom, and have made a couple of rugs, however they did not hold up well in the washer. I also have an issue when pulling off the pegs, has to be tabletop or do it on the floor or else it's a mess. Any ideas?

    ReplyDelete
    Replies
    1. Dear Anonymous, (gosh, I hope you come back to read this, because I don't have any other way of responding to you) I understand your concerns. I have washed one of my rugs several times, and though it comes out fairly wonky, I'm able to get it back into shape. Could your problem be the weft cording that you're using? I always work on a table, so haven't had any issues sliding the warp off the pegs. Maybe you're weaving too tightly? My thoughts are totally speculative. I'm sorry I can't be more help.

      Delete
    2. Hi I have a peg loom and have used an ironing board instead of a table, I do have to use clamps to hold it in place but the extra height is usefull as the weaving hangs over the side of the board....and it's a better use for an ironing board ha ha

      Delete
  22. Hi Anonymous! Thanks for sharing your perspective. An ironing board is a great idea. Personally, I don’t own an ironing board, but my table height is adjustable, so I implement the same concept. Wish I knew who you are, to personally say thank you!

    ReplyDelete

I reply to comments! If you are a no-reply commenter, or your profile appears as anonymous, I will reply to you directly on this blog post. Please check back!

LinkWithin

Related Posts Widget for Blogs by LinkWithin